Marine
At JBA Calibration Services we specialise in the marine industry. In almost every circumstance equipment can be supplied, repaired, serviced and calibrated and labelled on your vessel, thus reducing the vessels downtime which is generally associated with sending equipment off site to a laboratory. Our highly qualified engineers and calibration technicians whom are available 7 days a week 365 days a year to assure if any vessel was to get delayed we are on hand to get the work done.
Although the majority of our shipping clients are UK based, here at JBA Calibration we have also partnered with calibration laboratories across the globe and have technicians available to travel worldwide at short notice. All on site calibration services are performed with tractability back to national standards giving you that clarification.
Emergency Call Out
We have a dedicated team of highly qualified engineers and calibration technicians whom are available 7 days a week 365 days a year to assure if any vessel was to get delayed we are on hand to get the work done.
Emergency Call Out Number: 078457 62480 (1-5hrs Response Time)
Emergency Email: [email protected]
OEM APPROVED CALIBRATION & SERVICING
JBA Calibration offers on board calibration services of your vessels marine safety and instrumentation equipment. 7 days a week, 365 days a year. For more information regarding our OEM Approved Calibrations give our Marine team a call 01482 689049
PRODUCT SUPPLY
JBA Calibration have a wide range of products which can be supplied to your vessel on arrival, we offer a free calibration with all instruments supplied through our sales team. We are in partnership with Point Safety Ltd as an approved supplier of manufactures such as BW, Crowcon, MSA, Analox, Blackline, Drager, GMI, Honeywell, Riken Keiki, RAE, Industrial Scientific and Scott Safety. For more information visit our Sales and Hire Page
WORLDWIDE LOCATIONS
JBA Calibration currently operate in over 15 locations worldwide. Our extensive network of trusted partners combined with our own independently run workshops ensure we can attend your vessel or supply spares at the locations to suit you.
ONBOARD AND WORKSHOP REPAIRS
If spare parts are required we will do our best to repair on board. If on board repair is not possible then we guarantee to have the equipment repaired or replaced at our workshop and back on board prior to vessel departure.
The below items can also be repaired, supplied and calibrated all on the vessel giving you no downtime.
Temperature And Temperature Controllers
- Ullage Temperature Interface or UTI Meters
- Temperature Calibrators
- Temperature Gauges
- Glass Thermometers
- Digital Thermometers
- Thermocouple Probes
- Humidity Indicators
- Thermohydrometers
- Thermohydrographs
- Temperature Transmitters
Gas Detection, Environmental And Flow Meters
- ODME Systems
- OWS Systems
- Gas Detectors
- Fixed Gas Detectors
- Gas Sampling Systems
- Breath Alcohol Screening Device
- Flowmeters
- Sound Level Meters
- Lux/Light Meters
- Conductivity Meters
- PH Meters
- Moisture Meters
Mechanical
- Torque Wrenches
- Crimping Tools
- Vernier Calipers
- Torque Transducers
- Ultrasonic Thickness Testers
- Tachometers
- Torque Multipliers
- Vibration Tachometers
- Micrometers
- Slip Block Sets
- Dial Test Indicators
- Protractors
- Plug Gauges
- Ring Gauges
- Rules
- Feeler Gauges
- Laser Alignment
Pressure
- Pressure Calibrators
- Process Gauges
- Pressure Gauges
- Vacuum Gauges
- Differential Gauges
- Pressure Relief Gauges
- Pressure Transmitters
- Digital Pressure Indicators
- Dead Weight Testers
- Pressure Recorders
Electrical / Electronic
- Multimeters
- Clamp Meters
- Milli-volt / Milli-amp Sources
- Ammeters
- Decade Boxes
- Multi-function Calibrators
- Ductors / Micro Ohm Meters
- Primary and Secondary Current Injection Test Sets
- Frequency Generators / Counters / Timers
- Oscilloscopes
- Chart Recorders
- Power Supplies
- High Voltage Flash / Cable Testers
- Portable Appliance Testers
- Insulation Testers
- Earth Impedance Testers
- Earth Resistance Testers
- RCD Testers
- Stop Watches
- Transmitters
- Transducers
Looking for test gas bottles? We have a wide stock from mixed gases to single gases. For more information please contact us.
Gas Mixtures Available
Gas 50ppm H2S, 500ppm CO, 2.2% CH4,18% O2
Gas 20ppm H2S, 60ppm CO, 1.45% CH4, 15%O2
Gas 25ppm H2S, 50ppm CO, 2.5% CH4,12% O2/
Gas 25ppm H2S, 50ppm CO, 2.5% CH4, 12% O2
Gas 25ppm H2S, 100ppm CO, 2.5% CH4, 18%
Gas 8% C4H10/N2 16L (34L)
Gas 25ppm H2S, 100ppm CO, 2.5% CH4, 18%
Gas 25ppm H2S, 50ppm CO, 0.9% i-C4H10, 12
Gas 99.999% N2 (103L)
Gas 25ppm H2S/N2 (34L)
Gas 25ppm H2S/N2 (58L) (IMPA 85 15 41)
Gas 2.5% (50% LEL) CH4/Air (103L)
Gas 8% C4H10, 13.8% CO2/N2 (34L)
Gas 10ppm H2S, 300ppm CO, 1.45% CH4,
Gas 0.9% (50% LEL) i-C4H10/Air (103L)
Gas 99.99% N2 (34L)
Gas 10% i-C4H10/N2 -18L (34L)
Gas 0.9% (50% LEL) i-C4H10/Air (34LS)
Gas 50% CH4/N2 (34L)
Gas 99.99% VOL N2 (34LS)
Gas 8% C4H10, 13.8% CO2/N2 (34L)
Gas 50ppm H2S, 0.9%C4H10,18%O2/N2 (58L)
Gas 0.9% (50% LEL) i-C4H10/Air (34L)
Gas 1.1% (50% LEL) C3H8/Air (103L)
Gas 20ppm H2S, 60ppm CO, 1.45% CH4, 15% O
Gas 2.5% (50% LEL) CH4/Air (34LS)
Gas 20ppm H2S, 1.05% C3H8/N2 (58L)
Gas 0.9% (50% LEL) C4H10/Air (103L)
Gas 10% i-C4H10/N2 (FLAM) (24 L)
Gas15ppm H2S, 50ppmCO, 2,5%CH4 18% O2/N2
Gas 25ppm H2S, 100ppm CO, 2.2% CH4, 18% O
Gas 100ppm i-C4H8/Air (103 L)
Gas 260.5 PPM C2H5OH/N2 (103L)
Gas 50ppm H2S/N2 (58L) (IMPA 85 15 45)
Gas 50ppm H2S/Air (58L)
Gas 0.9% (50% LEL) i-C4H10/Air 17L
Gas 40ppm H2S, 100ppm CO, 2.5% CH4, 15% O
Gas 10% i-C4H10/N2 - 17L
Gas 2.5% (50% LEL) CH4/Air 17L
Gas 1.1% (50%LEL) C3H8/Air 17L
Gas 10% O2/N2 (103L)
Gas 25ppm H2S/Air (58L)
Gas 40ppm H2S/N2 (34L)
Gas 8% C4H10, 13.8% CO2/N2 (FLAM) (17L)
Gas 0.9% (50% LEL) C4H10/Air (34L)
Gas 2.5% (50% LEL) CH4/Air (34L)
Gas 8% i-C4H10/N2-24L (34L)
Gas 25ppm H2S, 100ppm CO, 2.5% (50%LEL) C
Gas 100ppm I-C4H8/Air (34L)
Gas 10ppm H2S, 50ppm CO, 2.5% CH4, 18% O2
Looking for test gas bottles?
We have a wide stock from mixed gases to single gases.
